NORMES

Abréviations : 

  • ASTM : American Society for Testing and Material
  • AISI : American Iron Steel Institute
  • SAE : Society of Automotive Engineers
  • AWS : American Welding Society
  • API : American Petroleum Institute
  • ASME : American Society of Mechanical Engineers
  • AMS : Aerospace Material Specifications
  • UNS : Unified Numbering System
  • NORSOK : Norsk Sokkels Konkuranseposisjon
  • NACE : National Association of Corrosion Engineers
  • RCC-M : Règles de conception et de construction des matériels mécaniques des ilôts nucléaires REP
  • DESP :  Directive Européenne des Equipements Sous Pression
  • PED :  Pressure Equipment Directive

NF EN 10088-1
Aciers inoxydables – Partie 1 : liste des aciers inoxydables

NF EN 10088-2
Aciers inoxydables – Partie 2 : conditions techniques de livraison des tôles et bandes en acier de résistance à la corrosion pour usage général

NF EN 10088-3
Aciers inoxydables – Partie 3 : conditions techniques de livraison pour les demi-produits, barres, fils tréfilés, profils et produits transformés à froid en acier résistant à la corrosion pour usage général

NF EN 10088-4
Aciers inoxydables – Partie 4 : conditions techniques de livraison des tôles et bandes en acier résistant à la corrosion pour usage de construction

NF EN 10088-5
Aciers inoxydables – Partie 5 : conditions techniques de livraison pour les barres, fils tréfilés, profils et produits transformés à froid en acier résistant à la corrosion pour usage de construction

NF EN 10272
Barres en acier inoxydable pour appareils à pression

NF EN 10250-1
Pièces forgées en acier pour usage général – Partie 1 : exigences générales

NF EN 10250-2
Pièces forgées en acier pour usage général – Partie 2 : aciers de qualité non alliés et aciers spéciaux

NF EN 10250-3
Pièces forgées en acier pour usage général – Partie 3 : aciers spéciaux alliés

NF EN 10250-4
Pièces forgées en acier pour usage général – Partie 4 : aciers inoxydables

NF EN 10222-1
Pièces forgées en acier pour appareils à pression – Partie 1 : prescriptions générales concernant les pièces obtenues par forgeage libre.

NF EN 10222-2
Pièces forgées en acier pour appareils à pression – Partie 2 : aciers ferritiques et martensitiques avec caractéristiques spécifiées à température élevée

NF EN 10222-3
Pièces forgées en acier pour appareils à pression – Partie 3 : aciers au nickel avec caractéristiques spécifiées à basse température.

NF EN 10222-4
Pièces forgées en acier pour appareils à pression – Partie 4 : aciers soudables à grains fins avec limite d’élasticité élevée.

NF EN 10222-5
Pièces forgées en acier pour appareils à pression – Partie 5 : aciers inoxydables martensitiques, austénitiques et austéno-ferritiques

NF EN 10083-1
Aciers pour trempe et revenu – Partie 1 : conditions techniques générales de livraison

NF EN 10083-2
Aciers pour trempe et revenu – Partie 2 : conditions techniques de livraison des aciers non alliés

NF EN 10083-3
Aciers pour trempe et revenu – Partie 3 : conditions techniques de livraison des aciers alliés

NF EN 10084
Aciers pour cémentation – Conditions techniques de livraison

NF EN 10085
Aciers pour nitruration – Conditions techniques de livraison

NF EN 10087
Aciers de décolletage – Conditions techniques de livraison pour les demi-produits, barres et fils-machine laminés à chaud.

NF EN 10025-1
Produits laminés à chaud en aciers de construction – Partie 1 : conditions techniques générales de livraison

NF EN 10025-2
Produits laminés à chaud en aciers de construction – Partie 2 : conditions techniques de livraison pour les aciers de construction non alliés

NF EN 10025-3
Produits laminés à chaud en aciers de construction – Partie 3 : conditions techniques de livraison pour les aciers de construction soudables à grains fins à l’état normalisé/laminage normalisé

NF EN 10025-4
Produits laminés à chaud en aciers de construction – Partie 4 : conditions techniques de livraison pour les aciers de construction soudables à grains fins obtenus par laminage thermomécanique

NF EN 10025-5
Produits laminés à chaud en aciers de construction – Partie 5 : conditions techniques de livraison pour les aciers de construction à résistance améliorée à la corrosion atmosphérique

NF EN 10025-6
Produits laminés à chaud en aciers de construction – Partie 6 : conditions techniques de livraison pour produits plats en aciers à haute limite d’élasticité à l’état trempé et revenu

NF EN 10028-7
Produits plats en aciers pour appareils à pression – Partie 7 : aciers inoxydables

NF EN 10095
Aciers et alliages de nickel réfractaires

NF EN 10210-1
Profils creux de construction finis à chaud en aciers non alliés et à grains fins – Partie 1 : conditions techniques de livraison

NF EN 10216-5
Tubes sans soudure pour service sous pression – Conditions techniques de livraison – Partie 5 : tubes en aciers inoxydables

NF EN 10217-7
Tubes soudés en acier pour service sous pression – Conditions techniques de livraison – Partie 7 : tubes en aciers

NF EN 10269
Aciers et alliages de nickel pour éléments de fixation utilisés à température élevée et/ou basse température

NF EN 10273
Barres laminées à chaud en acier soudables pour appareils à pression, avec des caractéristiques spécifiées aux températures élevées

NF EN 10277-1
Produits en acier transformés à froid – Conditions techniques de livraison – Partie 1 : généralités

NF EN 10277-2
Produits en acier transformés à froid – Conditions techniques de livraison – Partie 2 : aciers d’usage général

NF EN 10277-3
Produits en acier transformés à froid – Conditions techniques de livraison – Partie 3 : aciers de décolletage

NF EN 10277-4
Produits en acier transformés à froid – Conditions techniques de livraison – Partie 4 : aciers pour cémentation

NF EN 10277-5
Produits en acier transformés à froid – Conditions techniques de livraison – Partie 5 : aciers pour trempe et revenu

NF EN 10297-1
Tubes ronds sans soudure en acier pour utilisation en mécanique générale et en construction mécanique – Conditions techniques de livraison – Partie 1 : tubes en acier non allié et allié

NF EN 10297-2
Tubes sans soudure de section circulaire en acier pour utilisation en mécanique générale et en construction mécanique – Conditions techniques de livraison – Partie 2 : tubes en acier inoxydable

NF EN ISO 4957
Aciers à outils

ISO 683-17
Aciers pour traitement thermique, aciers alliés et aciers pour décolletage – Partie 17: Aciers pour roulements

ASTM B265
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B348
Standard Specification for Titanium and Titanium Alloy Bars and Billets

ASTM B381
Standard Specification for Titanium and Titanium Alloy Forgings

ASTM F67
Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

ASTM F136
Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

NF EN 10302
Aciers et alliage à base de nickel et de cobalt résistant au fluage

NF EN 10095 Juillet 1999
Aciers et alliages de nickel réfractaires

ASTM A494 / A494M
Standard Specification for Castings, Nickel and Nickel Alloy

ASTM B127
Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

ASTM B160
Standard Specification for Nickel Rod and Bar

ASTM B162
Standard Specification for Nickel Plate, Sheet, and Strip

ASTM B163
Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASTM B164
Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

ASTM B166
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

ASTM B167
Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

ASTM B168
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet

ASTM B333
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

ASTM B335
Standard Specification for Nickel-Molybdenum Alloy Rod

ASTM B366
Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

ASTM B407
Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASTM B408
Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

ASTM B409
Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

ASTM B443
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Plate, Sheet, and Strip

ASTM B444
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

ASTM B446
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar

ASTM B462
Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

ASTM B473
Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

ASTM B516
Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes

ASTM B517
Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

ASTM B546
Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

ASTM B564
Standard Specification for Nickel Alloy Forgings

ASTM B574
Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod

ASTM B575
Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip

ASTM B581
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

ASTM B619
Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

ASTM B622
Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASTM B625
Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip

ASTM B626
Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

ASTM B637
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ASTM B649
Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

ASTM B865
Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

ASTM B906
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

ASTM F1684
Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

ASTM A105 / A105M
Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A182 / A182M
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

ASTM A193 / A193M
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A204 / A204M
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

ASTM A217 / A217M
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A240 / A240M
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

ASTM A266 / A266M
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

ASTM A276 / A276M
Standard Specification for Stainless Steel Bars and Shapes

ASTM A289 / A289M
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

ASTM A297 / A297M
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

ASTM A299 / A299M
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

ASTM A302 / A302M
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

ASTM A312 / A312M
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A351 / A351M
Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

ASTM A352 / A352M
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

ASTM A358 / A358M
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

ASTM A387 / A387M
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

ASTM A515 / A515M
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

ASTM A516 / A516M
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

ASTM A533 / A533M
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

ASTM A537 / A537M
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

ASTM A743 / A743M
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

ASTM A778 / A778M
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

ASTM A336 / A336M
Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A350 / A350M
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

ASTM A451 / A451M
Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

ASTM A473
Standard Specification for Stainless Steel Forgings

ASTM A479 / A479M
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

ASTM A484 / A484M
Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

ASTM A487 / A487M
Standard Specification for Steel Castings Suitable for Pressure Service

ASTM A494 / A494M
Standard Specification for Castings, Nickel and Nickel Alloy

ASTM A508 / A508M
Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

ASTM A553 / A553M
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel

ASTM A564 / A564M
Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

ASTM A565 / A565M
Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

ASTM A694 / A694M
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

ASTM A638 / A638M
Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

ASTM A705 / A705M
Standard Specification for Age-Hardening Stainless Steel Forgings

ASTM A743 / A743M
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

ASTM A744 / A744M
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

ASTM A747 / A747M
Standard Specification for Steel Castings, Stainless, Precipitation Hardening

ASTM A757 / A757M
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

ASTM A788 / A788M
Standard Specification for Steel Forgings, General Requirements

ASTM A890 / A890M
Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

ASTM A965 / A965M
Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A995 / A995M
Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

NF EN ISO 9445-1
Acier inoxydable laminé à froid en continu – Tolérances sur les dimensions et la forme – Partie 1 : bandes étroites et feuillards coupés à longueur

NF EN ISO 9445-2
Acier inoxydable laminé à froid en continu – Tolérances sur les dimensions et la forme – Partie 2 : larges bandes et tôles

NF EN 10029
Tôles en acier laminées à chaud, d’épaisseur égale ou supérieure à 3 mm – Tolérances sur les dimensions et la forme

NF EN ISO 18286
Tôles en acier inoxydable laminées à chaud – Tolérances sur les dimensions et la forme

NF EN 10051
Bandes laminées à chaud en continu, bandes et tôles issues de larges bandes laminées à chaud en aciers alliés et non alliés – Tolérances sur les dimensions et la forme

NF EN 10058
Plats en acier laminés à chaud pour usages généraux – Dimensions et tolérances sur la forme et les dimensions

NF EN 10059
Carrés en acier laminés à chaud pour usages généraux – Dimensions et tolérances sur la forme et les dimensions –

NF EN 10060
Ronds laminés à chaud – Dimensions et tolérances sur la forme et les dimensions

NF EN 10278
Dimensions et tolérances des produits en acier transformé à froid

NF EN ISO 1127
Tubes en acier inoxydable – Dimensions, tolérances et masses linéiques conventionnelles

NF EN 10228-1
Essais non destructifs des pièces forgées – Partie 1 : contrôle par magnétoscopie.

NF EN 10228-2
Essais non destructifs des pièces forgées en acier – Partie 2 : contrôle par ressuage.

NF EN 10228-3
Essais non destructifs des pièces forgées en acier – Partie 3 : contrôle par ultrasons des pièces forgées en aciers ferritiques et martensitiques.

NF EN 10228-4
Essais non destructifs des pièces forgées en acier – Partie 4 : contrôle par ultrasons des pièces forgées en aciers inoxydables austénitiques et austéno-ferritiques

ASTM A388 / A388M
Standard Practice for Ultrasonic Examination of Steel Forgings

ASTM A745 / A745M
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

ASTM A275 / A275M
Standard Practice for Magnetic Particle Examination of Steel Forgings

ASTM E165 / E165M
Standard Practice for Liquid Penetrant Examination for General Industry

ASTM A342 / A342M
Standard Test Methods for Permeability of Weakly Magnetic Materials

ASTM A370
Standard Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM E8 / E8M
Standard Test Methods for Tension Testing of Metallic Materials

ASTM E10
Standard Test Method for Brinell Hardness of Metallic Materials

ASTM E18
Standard Test Methods for Rockwell Hardness of Metallic Materials

ASTM E21
Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

ASTM E23
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

ASTM E384
Standard Test Method for Knoop and Vickers Hardness of Materials

NF EN ISO 377
Acier et produits en acier – Position et préparation des échantillons et éprouvettes pour essais mécaniques

NF EN 10002-1
Matériaux métalliques – Essai de traction – Partie 1 : méthode d’essai à température ambiante

NF EN ISO 6892-1
Matériaux métalliques – Essai de traction – Partie 1 : méthode d’essai à température ambiante

NF EN ISO 6892-2
Matériaux métalliques – Essai de traction – Partie 2 : méthode d’essai à température élevée

NF EN ISO 6892-3
Matériaux métalliques – Essai de traction – Partie 3 : méthode d’essai à basse température

ISO/PRF 6892-4
Matériaux métalliques – Essai de traction – Partie 4: Méthode d’essai dans l’hélium liquide

NF EN 10045-1
Matériaux métalliques – Essai de flexion par choc sur éprouvette Charpy – Partie 1 : méthode d’essai

NF EN ISO 148-1
Matériaux métalliques – Essai de flexion par choc sur éprouvette Charpy – Partie 1 : méthode d’essai

NF EN ISO 6506
Matériaux métalliques – Essai de dureté Brinell

NF EN ISO 6507
Matériaux métalliques – Essai de dureté Vickers

ISO 6508
Matériaux métalliques – Essai de dureté Rockwell

ASTM A262
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

ASTM A923
Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

ASTM G28
Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

ASTM G48
Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

NF EN ISO 3651-2
Détermination de la résistance à la corrosion intergranulaire des aciers inoxydables – Partie 2 : aciers inoxydables ferritiques, austénitiques et austéno-ferritiques (duplex). Essais de corrosion en milieux contenant de l’acide sulfurique.

ASTM A604 / A604M
Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

ASTM E112
Standard Test Methods for Determining Average Grain Size

ASTM E930
Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

ASTM E3
Standard Guide for Preparation of Metallographic Specimens

ASTM E407
Standard Practice for Microetching Metals and Alloys

ASTM E562
Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

ASTM E1245
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

ASTM E45
Standard Test Methods for Determining the Inclusion Content of Steel

DIN50602
Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions

NF EN ISO 643
Aciers – Détermination micrographique de la grosseur de grain apparente

ISO 4967
Aciers – Détermination de la teneur en inclusions non métalliques – Méthode micrographique à l’aide d’images types

Nous contacter